1. Wd My Passport Not Detected Windows 10
2. Why Is External Hard Drive Not Showing Up Mac
3. Portable External Hard Drive
4. My Passport External Hard Drive Not Detected

Summary :

1. WD My Passport is not detected or recognized. WD My Passport does not show up on PC or Mac. The WD external hard drive does not spin. Clicking noises from WD My Passport hard drive. The power LED is on but the WD drive is not accessible. Unable to see the data files in WD drive when it detected. When you can not access WD My Passport hard drive.
2. Question: Q: MY PASSPORT WD Drive not showing on my macbook but shows on others. For no reason whatsoever my macbook pro won't show my WD external HD. It powers up normally and I see the light on the HD, it reads on other macbook pro's and it even gets read by my LG smart TV.

WD My Passport Does Not Show up due to Virus Attack. As mentioned above, an external hard drive must be formatted properly so that it can be detected by Windows or Mac OS. However, sometimes, virus infection might corrupt the file system of WD my passport external hard drive and make it not show up when you connect the external to your computer.

Sometimes, when you connect an external hard drive to your computer, you may find it fails to show up. The external hard drive not showing up problem occurs frequently on Windows PC or Mac, and it could lead to data loss.

There are some useful fixes to the external hard drive not detected on Windows 10. Please read this page offered by MiniTool to know how to access the drive without data loss.

External Hard Drive Not Showing Up PC

Whether you're plugging in a new hard drive or an old one to your computer, it is possible that you can't see it. Some people even reported that the external hard drive is showing up in devices but not in my computer. This is not a rare issue; it has ever happened to many people and will be happening to more.

What are the possible causes for external hard drive not showing up on computer issue?

• Insufficient power supply
• Lack of drive letter
• Outdated drivers
• File system issues
• Partition problems
• Dead USB port
• …

In the following content, I’ll mainly discuss external hard drive not showing up/recognized on Windows 10 in 2 different situations. After that, I’ll tell you what do I do if my hard drive is not detected.

What to Do When You Can't See External Hard Drive

Many people have the same experience – they suddenly find an external hard drive is not recognized by the computer; it won't show up in File Explorer (PC not recognizing external hard drive). The first thing to do at this time is checking whether there’s an AC power adapter and whether it’s plugged in. If not, please plug it into your PC properly.

After that, you should press Windows + E to open the File Explorer and check whether the external drive appears now.

Open Disk Management to Check

If the external or USB hard drive is still not showing up (WD external hard drive or Toshiba hard drive is not showing up in File Explorer), your next step is to open Disk Management and check.

1. Open Windows search by pressing Win+S.
2. Type disk management.
3. Select Create and format hard disk partitions.
4. Browse the drives list to look for your external disk.

If you find the external hard disk showing up in Disk Management as unallocated/not initialized/offline, it would be easy to fix the external hard drive not recognized problem (refer to Method 2: Check & Fix the Drive in Disk Management below). This is what people described as external hard disk detected but not showing in My Computer.

Seagate external hard drive not showing up.

I know there are a million posts about this issue, but I haven't come across one that fixed my issue and I really don't want to have to shell out a ton of money recovering my data. Running Windows 10 on an Asus K55N and connecting a Seagate Free Agent Go Flex Desk 2TB external drive. When I connect the drive, it shows in Disk Management and the Safely Remove Hardware icon, but I can't get it to populate in File Explorer. I have not tested on another computer, but I have tested with a different USB cable and was able to connect two other external drives. I did the trial of the Seagate Recovery Suite and was able to see all my files listed, I was just hoping to not have to pay to recover the data (if that's what it boils down to, so be it).- said Corey_23 on Tom’s Hardware Forum

Please read Recover Data From Disk Shows As Unknown Without Damaging It to learn how to fix this.

WD external hard drive not recognized Windows 10.

Case:

I have a WD My Passport portable USB hard drive which one of my computers can't detect when plugged in. It doesn't show up in My computer, Device Manager or Disk Management. The only way to get the device recognized is to reboot the computer with it connected, enter BIOS (and do nothing), and reboot again. The drive works fine on my other computer. It has the WD Unlocker Software built in.- posted by Lagnaetti on Windows 10 Forums, Drivers and Hardware

Obviously, Lagnaetti finds that his external hard drive is not being detected by My computer, Device Manager or even Disk Management. He wants to know how to fix the external hard disk not detected issue.

As said before, if the WD external drive doesn’t show up on your PC, you should first open Disk Management to have a look. If the WD external disk shows as unallocated/not initialized/offline, you can make it appear easily by formatting, creating a volume, initializing to mbr/gpt, or setting online. However, what if it doesn’t appear?

WD External Hard Drive Not Showing Up in Disk Management

If the WD external hard drive still isn't showing up in Windows Disk Management (computer is not detecting/reading or doesn't see the external hard drive), you should consider making the USB/external disk detected by restarting your computer, enabling legacy USB support, and using a different USB port. It’s possible that the USB port you use is failed so your computer won't recognize the external hard drive. Please try a USB 2.0 port if you're using USB 3.0 and connect the drive directly to the Windows PC instead if you’re using a USB hub.

In fact, there are some cases in which an external hard drive doesn't show up since it has being broken physically. Yet, there are still chances that the unrecognized hard disk can be repaired.

In addition, there are also some people who said their PS4 external hard drive is not recognized or Xbox One external hard drive is not detected/not showing up. I suggest that they connect the external hard drive to the computer and check.

What if the external hard drive still not showing up? When your external hard drive won’t show up on PC, you should first go to check it in Disk Manager. If your computer is still not recognizing external hard drive, you need to try the methods mentioned in this part.

How Do I Get Windows 10 to Recognize My External Hard Drive

External hard drive doesn't show up is a hot topic. Many people said they can't find external hard drive on the computer (computer doesn't find external hard drive). If you also encounter the portable hard drive not showing up (external HDD not showing up) on Windows 10 or other Windows systems, please change a USB port, check in Disk Management, run troubleshooter, update driver, etc.

11 useful solutions you should try:

1. Change a USB port.
2. Check the drive in Disk Management.
3. Run the Troubleshooter.
4. Update/uninstall/roll back driver.
5. Reinstall USB controllers.
6. Enable legacy USB support in BIOS.
7. Update system to the latest version.
8. Disable USB selective suspend setting.
9. Update motherboard chipset drivers.
10. Fix the system built-in drivers.
11. Kill virus on the computer and external drive.

Is your external drive not showing up? There are many useful workarounds for fixing the external hard drive not being detected in Windows 10 (how to repair hard disk not detected in Windows 7 is basically the same).

Method 1: Turn to Different USB Port or Computer

Change a USB Port

I find my computer doesn’t recognize my external hard drive because the USB port is broken. I tried a different USB port and it worked. If the external HD is not showing up when it's connected via a USB 3.0 port, you can also try a USB 2.0 port to detect the drive. Besides, you should try to connect the external hard drive directly to your PC and see whether your computer can detect the USB drive.

The USB drive not showing up Windows 10 may also occur when the power supply of a USB port is not sufficient. In this case, I advise you not to use USB hubs because some of them are not able to provide enough power supply to the external hard drive.

Method 2: Check & Fix the Drive in Disk Management

Sometimes, an external hard drive not showing in my computer (Windows Explorer) could appear in Disk Management. How to open Disk Management:

1. Press Windows + X keys.
2. Click on Disk Management option from the pop-up menu.

What prevents a drive from showing up:

• External hard drive Unallocated
• External hard drive Offline
• No drive letter

How to fix the problem in the above 4 cases?

Case 1: Create a New Volume

1. Right click on the unallocated space.
2. ChooseNew Simple Volume(or other volume types you need).
3. Click on the Next button in the New Simple Volume Wizard Welcome window.
4. Specify the volume size and click Next.
5. Finish Assign Drive Letter or Path and click Next.
6. Finish Format Partition and click Next.
7. Click on the Finish button in the New Simple Volume Wizard Completing window.
8. Wait for the operation to complete.

Watch how to Create Partition with MiniTool Partition Wizard.

Case 2: Initialize Disk

1. Right click on the unknown, Not Initialised disk.
2. Choose Initialise Disk from the context menu.
3. Choose a partition style from MBR and GPT and click on the OK button to confirm.
4. Wait for the operation to complete.

Use MiniTool Partition Wizard to Initialize to MBR Disk or Initialize to GPT Disk.

Case 3: Set Online

1. Right click on the disk which shows Offline.
2. Choose Online from the pop-up menu.
3. Wait a second.

Case 4: Change Drive Letter and Paths

Another way to make the unrecognized or undetectable WD external hard drive (WD Elements) show up on your PC is to change the drive letter.

1. Right click on the disk partition which has no drive letter.
2. Choose Change Drive Letter and Paths from the context menu.
3. Click on the Add button in the pop-up window.
4. Assign a drive letter to the partition and click OK to confirm.
5. Wait a second. The drive will show up and work again.

Change Drive Letter more easily with MiniTool Partition Wizard.

Do you want to recover your files from external hard drive not detected? If yes, please read the following tutorial.

Bonus Tip: How to Recover Files from External Hard Drive Not Detected

Step 1: download, install, and launch MiniTool Power Data Recovery. Then, connect your external hard drive to PC.

Step 2: shift to the Devices tab at the top and move your cursor to the target external hard drive.

Step 3: click on the Scan button to scan the selected external hard drive.

Step 4: browse the scan results during the scan. Alternatively, you can wait until the end of the scan and then select the files you want to restore.

Step 5: press the Save button and choose another drive with enough free space to store the recovered files.

Step 6: press the OK button to confirm the selection and start external hard drive file recovery.

At last, you can check the recovered files to put an end to the recovery work.

Please read this page if your external hard drive seems dead and you need to recover important data from it:

If you are stuck in finding ways to recover files from dead external hard drive efficiently, this passage will be very helpful.

Method 3: Run the Troubleshooter

For USB device not recognized in Windows, there is a useful tool to help: Hardware and Device Troubleshooter.

How to Run Hardware and Device Troubleshooter

1. Open Settings the way you like.
2. Choose Update and Security from Windows Settings panel.
3. Go to the Troubleshoot tab.
4. Scroll down to choose Hardware and Devices from the right pane.
5. Click on the Run the Troubleshooter button.
6. Wait for the detecting to complete.
7. Once the scan is completed, Windows will list the found issues.
8. You should choose the issue you want to fix and click Next.

Method 4: Fix Device Driver Problems

If you find your Toshiba external hard drive not showing up on PC (showing as unrecognized), you can open Device Manager to uninstall (or delete) the driver. Then, open My Computer or This PC to check whether the external hard drive shows up now or not. If it doesn’t show up, please restart your computer and check again.

Wd My Passport Not Detected Windows 10

How to Update, Uninstall, or Roll Back Driver

1. Press Start + X keys on the keyboard.
2. Choose Device Manager from the pop-up menu.
3. Expand Disk drives option.
4. Right click on the problematic drive.
5. Choose from Update driver, Uninstall device and Properties.
6. Finish the rest steps by looking at system prompt.

• The Update driver feature helps to fix the USB drive not recognized problem due to a corrupted/outdated device driver.
• The Uninstall device feature is used to uninstall your USB external hard drive with the issue. After that, you should remove the USB device from the computer and then reconnect it after at least 1 minute. This is useful when your USB driver has become unstable or corrupt.
• The Properties feature will help you further diagnose the problem by looking at the error Besides, you can choose to Roll Back Driver by shifting to Driver tab after clicking Properties.

Method 5: Reinstall USB Controllers

Also, you should open Device Manager using the above method or other ways you like. Then, finish the following steps.

How to Uninstall USB Controller

1. Find and expand Universal Serial Bus controllers.
2. Right click on a device and choose Uninstall device from the context menu.
3. Click on the Uninstall button in the pop-up window.
4. Repeat step 2 and step 3 to uninstall all devices under Universal Serial Bus controllers.
5. Restart your computer and Windows will install the USB controllers automatically.

Method 6: Enable Legacy USB Support

Sometimes, you may find your hard disk not detected in BIOS. This may be caused by the disabled Legacy USB Support.

How to Enable USB Support

1. Restart your PC.
2. Press the corresponding button to enter the BIOS utility.
3. Shift to Advanced tab.
4. Choose USB Configuration.
5. Select Legacy USB Support and set it to be Enabled.
6. Exit and save changes.

It’s not an easy task to recover data from a hard disk that is not detected in BIOS especially when the disk is an internal one. The good news is MiniTool Power Data Recovery bootable edition provides an easy way to recover data when the PC won’t start. As for how to recover data from undetected internal hard disk step by step, please read:

If you’re stuck in the data recovery from corrupted internal hard disk, the solutions and software provided here will be of great help.

Method 7: Install the Latest Windows Updates

This method has the same functionality as the Update driver.

How to Check for Updates

1. Type Windows Update into the Cortana search box.
2. Select Check for updates from the Best match.
3. Click on the Check for updates button and wait.
4. Finish the rest operations according to prompts.

If you find some files get lost after Windows Update, please use MiniTool Power Data Recovery to recover data at once.

Method 8: Disable USB Selective Suspend Setting

How to Disable USB Selective Suspend Setting

1. Type power plan into the Cortana search box.
2. Select Choose a power plan from the search result.
3. Click Change plan settings next to the plan used currently.
4. Click Change advanced power settings.
5. Find USB settings and click on the + button to expand it.
6. Click on the + button to expand USB selective suspend setting.
7. Change Setting to be Disabled.
8. Click on the Apply button to confirm and click on the OK button to close.

Method 9: Install the Latest Chipset Drivers for Motherboard

1. Look for the documentation of your computer to find the name of the motherboard manufacturer.
2. Visit the website of the manufacturer.
3. Find the drivers proper for your motherboard and install it on your computer.

Method 10: Repair the System Built-in Drivers

• Press F8 or another button to enter the safe mode during the boot process; select restart or shut down the computer and power on it later to enter the normal mode (to repair the registry).
• If the problem persists, please enter safe mode again to choose System Restore in order to restore your system to an earlier point when there’s no such problem.
• If the problem persists, please use the system disk to repair; open the command prompt, enter SFC / scannow, press Enter and insert the original system disk to repair the system
• If the problem persists, please set the CD-ROM as the first boot device in the BIOS; then, insert the system installation disc and press R key to select repair installation.
• If the problem still persists, I advise you to reinstall your OS.

Method 11: Run Anti-virus Program

If your PC is attacked by virus, unfortunately, any external hard drive connected to this PC will be affected. The virus may cause the external hard drive not showing issue. Please run anti-virus software to kill the virus and get Windows 10 to recognize your external hard drive.

RECOMMENDATION:

To recover data from virus infected external hard drive, you can try using MiniTool Power Data Recovery because of its excellent performance, high security, and simple operations. How to recover files after virus attack:

I feel glad to share solutions with users to help them recover files deleted by virus attack quickly and safely.

Xbox Not Detecting External Storage

Some Xbox One users said their console isn’t detecting the external storage device they connected. What they should do?

• Remove and reconnect the storage drive to the console.
• Connect to another USB port on the console.
• Power cycle the Xbox console: press the Xbox button on the front side for around 10 seconds -> power on the console to see whether it detects the external storage or not.

How to Fix: External Hard Disk Detected But Not Opening

There are also some people saying that their external hard drive could be detected by Windows, but can't be opened. The most direct reason is the file system problem.

When the file system of your hard drive is not supported by Windows, you won’t be able to access the drive. For instance, Windows gives no support for the ext4 file system (designed for Linux) and the HFS + file system (designed for Mac).

After clicking on the drive, you’ll be asked to format the disk before you can use it.

• If you choose Format, you should know that all your data saved here will be lost.
• If you choose Cancel, you will see the message: The volume does not contain a recognized file system.

Actually, themost common causes are:

• The file system is damaged.
• The file system is not supported.
• The drive becomes RAW.
• The parameter is incorrect.
• The file or directory is corrupted and unreadable.
• …

2 Methods for Solving External Hard Disk Detected But Not Opening

1. Run CHKDSK in Command Prompt.
2. Reformat the drive by using MiniTool Partition Wizard.

There are two useful methods for fixing the external hard drive detected but not opening error: run CHKDSK and format the drive.

Method 1: run CHKDSK.

1. Type cmd into the Cortana search box on the taskbar (what if Windows 10 taskbar is not working?).
2. Right click on Command Prompt from the search result.
3. Choose Run as administrator from the context menu.
4. Choose Yes in the User Account Control window.
5. Type chkdsk /r * (* stands for the drive letter) and press Enter.
6. Wait for the stages to complete.

Method 2: format the drive.

1. Launch MiniTool Partition Wizard.
2. Select the drive with an unsupported file system.
3. Right click on the drive and choose Format from the submenu.
4. Choose NTFS or FAT32 as the new file system.
5. Click on the OK button to confirm.
6. Press the Apply button in the main software window.
7. Choose Yes in the pop-up window to apply pending changes.
8. Wait for operations to complete.
9. Click on the OK button in the Successful window.

Click to see Format Partition Tutorial.

Conclusion

Though it may seem strange, it is not a rare problem that the external hard drive is not showing up/recognized/detected. There are many factors that could lead to this problem. When you find that your external hard drive is not showing up in your computer, please use the methods mentioned above to help your computer recognize the hard drive. You can also refer to this post to learn how to recover data from your external hard drive in different ways.

External Hard Drive Not Showing Up FAQ

When your WD My Passport Ultra hard drive or external hard drive is not showing up, you can neither access nor use the drive on your computer.

But don't worry. Follow this guide, you'll learn the causes and fixes to the WD Passport Ultra external hard drive not showing up error on your own.

Here is the complete guide to making your WD Passport external hard drive detected again:

Some of you may also want to learn what causes the wd external hard drive not showing up on the computer. Continue reading and check it out.

Why is My WD Passport Not Showing Up?

We consulted many experienced users and IT professionals, and we concluded the causes below. Check out why is your WD Passport Ultra external not showing up:

1. 1. A faulty USB port/cable, or a damaged USB hub on PC
2. 2. No drive letter is assigned to WD Passport drive
3. 3. Corrupted file system or bad sectors makes WD drive unreadable
4. 4. WD drive driver is out of date
5. 5. Universal USB controllers drivers are outdated

These causes may also lead to some of your other devices malfunctioning, such as:

So how to fix these errors and make your WD Passport Ultra external hard drive show up on PC again? Follow through the tutorials below to get rid of this issue immediately.

Part 1. Check The State of WD External Hard Disk in Disk Management

Connect the WD external hard drive to your computer via the USB cable. Follow steps here to check the state of your WD external hard drive in Disk Management:

Step 1. Press Windows + R keys, type diskmgmt.msc in the Run box, and click 'OK'.

Step 2. In Disk Management, locate and check the state of your WD external hard drive.

Part 2. Fix WD My Passport External Hard Drive Not Showing Up Error

Check the state of your not showing up or not detected WD My Passport Ultra external hard drive and refer to the right fix to make your drive work normally again.

Fix 1. Add New Drive Letter to Make WD Passport External Hard Drive Showing Up

Applies to: Fix WD passport external hard drive not showing up due to the drive letter confliction.

If your WD displays as 'New Volume' with no drive letter in Disk Management, it won't show up in File Explorer. Don't worry.

You can change or add a new drive letter so to make WD passport detectable and accessible again in Windows PC:

Step 1. Press Win + R keys, type diskmgmt.msc in the Run dialog, click 'OK' to open Disk Management.

Step 2. Right-click on WD drive which fails to show up and choose 'Change Drive Letter and Paths...'.

Step 3. Click 'Add', set a new drive letter to assign to the WD external drive, and click 'OK'.

If the WD drive has already been assigned with a letter, click 'Change' to choose another letter for it. After this, restart your PC and check if you can visit the WD external hard drive in Windows File Explorer.

Fix 2. Fix Corrupted File System/Bad Sector

Applies to: Fix WD passport external hard drive not showing up due to file system error or bad sectors.

If the system files are corrupted or the WD device contains bad sectors, Windows disk management may detect it as '*Others' or RAW. Your computer may not even able to detect it from File Explorer.

EaseUS partition manager software with its Check File System feature can help. As long as your Disk Management can detect it, you can apply this tool to fix the corrupted file system and bad sectors on WD hard drive.

Follow to see how to fix corrupted system files and bad sectors on WD device:

After this, you can check the drive. If your files were missing, move to Part 3 and apply reliable data recovery software to bring back all your WD external hard drive data.

Fix 3. Plug WD My Passport Halfway-in-USB

This method is more like a temporary solution. According to a user's feedback on a forum, in this 'bizarre way', his computer successfully recognized the external hard drive. Here's how to do it.

Step 1. Plug the USB cable halfway through any one of your computer's USB ports.

Step 2. Wait for the WD hard drive to show up in File Explorer.

Step 3. When you see your hard drive, push the USB completely into the USB port.

It might be unreasonable, but quite a lot of people solved their problem with this trick. Have a try on it!

Fix 4. Try a Different USB Cable/Port or PC

When your WD hard drive neither shows up in File Explorer nor Disk Management, you can try to change the USB cable, try another USB port, or a new PC to see if the drive can be read or not.

Step 1. Switch a USB port/cable and replug it to your computer.

If the drive can be read via new a USB cable or on a new PC, then the drive is working fine. The problem is with the USB cable.

Step 2. Reconnect the WD drive via a new USB hub or to a new PC.

• If the WD Passport drive shows up, it is the damaged USB hub that stops WD from showing up.
• If the WD passport is not detected either on your current or the new PC, replace the WD drive with a new one.

Fix 5. Update WD External Device Driver & Reinstall BUS Controllers

When the WD Passport drive is not working, it might be caused by the outdated device drivers. So the best way is to update its driver via the following three paths:

#1. Download and Install WD Device Driver:

Step 1. Connect the problematic WD external hard drive to your PC.

Step 2. Right-click on the Windows icon and select 'Device Manager'.

Step 3. Find and expand Disk Drivers, Portable Devices, Universal Serial USB Controllers, or Other devices.

See if the WD external hard drive is shown as an 'Unknown' device.

Step 4. Right-click on Unknown or not working WD external hard drive, select 'Properties'.

Step 5. Go to the Details tab, set Property to 'Hardware Ids'.

Step 6. Right-click the top Value and click 'Copy'.

Step 7. Paste it into a browser and search for the correct device driver.

Step 8. Find and download the correct WD device driver and install it on your PC.

After this, restart your computer. And everything shall work fine with your WD My Passport Ultra drive.

#2. Update WD Device Driver from Device Manager:

Step 1. Right-click on the Windows icon and select 'Device Manager'.

Step 2. Expand Device Manager and right-click the WD My Passport Ultra drive.

Step 3. Select 'Update driver'.

Step 4. Select 'Search automatically for updated driver software', wait for the process to complete.

#3. Uninstall/Reinstall USB Controllers

When the Universal USB Bus Controllers are outdated, it may also stop your WD passport from being detected or showing up. So you can try to uninstall and reinstall USB controllers:

Step 1. Right-click on the Windows icon and select 'Device Manager'.

Step 2. Expand Universal Serial Bus controllers, right-click on USB controllers of the WD drive, and select 'Uninstall device'.

Repeat to uninstall each USB controller one by one.

Step 3. Restart the computer and Windows will automatically reinstall the USB controllers of your WD drive.

After this, you shall be able to visit and access saved data on your WD Passport Ultra drive normally by then.

Fix 6. Send 'Unknown' & Not Detected WD External Hard Disk for Repair

If your WD external hard drive displays as 'Unknown' in disk management, the last thing you can try is to send the disk for repair.

You have two options for this issue:

• Option 1. Beyond the Warranty: Send WD external disk for repair in a local repair center
• Option 2. Within the Warranty: Send WD external disk back to its manufacturer

Part 3. Get Data Off WD External Disk and Format It to Work Again

If your WD hard drive shows up and you can access the disk again. Take the last guide in this part to fully protect your files and make the WD external hard drive viable for saving and editing data again.

#1. Get Data Off WD External Hard Drive

Here are two ways that you can fully get files from your WD external hard drive:

1. 1. Open and copy data from your WD hard drive to another storage device as a backup.
2. 2. Recover lost files from WD drive with EaseUS file recovery software.

Note that, if you lost some valuable files during the process, don't worry. Professional file recovery software can scan and bring back your files in 3 steps:

Step 1. Choose the external hard drive

• Since you're going to recover data from an external hard drive, you need to correctly connect the drive to your Windows computer.
• Run EaseUS Data Recovery Wizard and choose the exact external drive where you lost data.
• Click Scan.

Step 2. Check the scan results

The software will immediately start scanning the selected drive for all lost data. During the scan, you can see more and more data showing up in the results. The Filter feature is there for you to quickly locate the files of one kind, such as Pictures, Word/Excel/PDF documents, Videos, etc.

Step 3. Preview and recover data

• Double-clicking a file will allow you to preview its content.
• Choose the file(s) and click Recover.
• Select a different drive to save the recovered files instead of the original one.

Remember to save the recovered files to another secure location and then move to the next guide to format your WD My Passport external hard drive to usable again.

#2. Format WD External Hard Drive to Usable

Here, you may also let EaseUS Partition Master help. It's easy and efficient in formatting a disk:

Why Is External Hard Drive Not Showing Up Mac

Step 1. Launch EaseUS Partition Master, right-click the partition on your external hard drive/USB/SD card which you want to format and choose the 'Format' option.

Step 2. Assign a new partition label, file system (NTFS/FAT32/EXT2/EXT3), and cluster size to the selected partition, then click 'OK'.

Step 3. In the Warning window, click 'OK' to continue.

Step 4. Click the 'Execute Operation' button in the top-left corner to review the changes, then click 'Apply' to start formatting your external hard drive/USB/SD card.

After this, you can save the data back to your WD external hard drive again.

Make Your WD External Hard Drive Show Up and Work Now

On this page, we explained why is WD My Passport Ultra external hard drive not showing up on Windows PC and provided 6 practical fixes for you to follow and make the drive show up again.

As a beginner, we suggest that you follow the whole guide one by one. These fixes also work to resolve the same issue on all brands of external hard drive, internal hard drive, USB, or SD card.

Now, it's your turn. Take steps to fix your not showing up WD external hard drive and make it work again without losing any data.

People Also Ask

For further issues related to the WD passport, check the questions and answers below. You'll get a satisfying answer:

1. WD My Passport not showing up on Mac

If you are having a similar issue that WD My Passport external or internal hard drive not showing up on Mac, you can try the following tips as listed here for help: （Some are similar as shown on this page)

1. #1. Reconnect WD Passport to Mac
2. #2. Change WD Passport drive letter
3. #3. Remount WD Passport to Mac
4. #4. Update WD Passport drive driver
5. #5. Format WD My Passport on Mac

2. How to use WD Passport on Windows 10?

For a new WD Passport: Connect Passport to Windows 10 PC > Open Disk Management and Initialize Disk > Create a New Partition on WD Passport drive.

For a used WD Passport: Connect it to Windows 10 > Open it in File Explorer to use it. If you need more space, delete some useless files on it to free up space.

3. Why is my external hard drive not showing up?

Portable External Hard Drive

Accordingly, many reasons may cause your external hard drive not showing up. Here is a list of major reasons:

• The external hard drive is not connected to the PC correctly
• Faulty USB cable or USB hub
• External hard drive is not initialized
• External hard drive is doesn't contain a volume
• External hard drive has no drive letter
• External hard drive contains file system error, bad sectors, or virus

My Passport External Hard Drive Not Detected

For a resolution, follow to External/Internal Hard Drive Is Not Showing Up in Windows 10/8/7.